Operation instruction for camera watch
.Preface
Thank you for using our product, this manual can guide you to use it and the application program corectly, before you use this product and its application program.
Please pay enough attention to the manual to ensure you can use this product correctly and easily.
Function summarize
.Camera:1.3M pixels.USB transfer rate:2.0(Hs)
.Camera dimension:352*288
.Optional memory: 2GB
.Supports video and voice recording function
.Built-in ithium battery, keep on working for 2 hours.
.No need to install drivers for windows ME/2002/XP/MAX OS 9.2.2 or higher version windows(except Windows 98)
Charge
1. This camera watch is built-in chargeable ithium battery, to charge, you can connect the USB cable to watch and the charger or connect to the USB port of PC, if it is done correctly, you will find the green light on the watch is on, when the battery id is full, the red light will be on, and you can stop charging this time.
2. During cameraing, the camera will turn off automatically when lacking of power, also, the system will save the cameraing file before it is power off, this can ensure the security of the file.
Exterior and key
1. Swift on/Camera/Save/Swift off
2. Reset key
3. USB port
4. Camera
5. Indicator
Operation
1. Swish on: press PLAY button for 4 seconds, the light state will be below:
a. The green light is on for 4 seconds
b. The green light flash for 3 times
c. The green light is turn off
d. Enter DV state, all the light is turn off.
If you want to save the DV, just press PLAY button for 4 seconds to save it and turn it off.(The red light will flash for 1 times) (Note: if not enough flash space the DV watch will turn it off itself).
2. Reset key: if the system halted, please press reset key to restart
Driver installation
For Window 98 users, you need to install the drivers to your PC by using the CD and then restart first before it works.
But no need this operation for windows ME/2002/XP/Mac OS 9.2.2 and the higher version windows
Connect to computer
1. Used USB-cable connected to the computer, the disk of the watch will be shown on your computer.
2. You can view the record file on this disk, you can copy, remove, delete, paste it. Also you can store other file in it.
3. Remove USB drive.
a. Double click on the icon Safety delete the hardware (the green arrow under right of screen)
b. Click stop in the dialog of Safety delete the hardware.
c. Choose the dive you need to stop, select confirm, the drive will safety delete.
(The arrow space will jump out message: USB Mass Storage Device, this drive can safety pull out of the system)
d. Close dialog Safety delete hardware
e. Pull out the drive & Disconnect of the computer.
Technology specification
Connect to computer | USB 2.0 |
Flash | 512M-8G |
Charge voltage limit | 4.2V |
Charge hours | 2-3H |
Videotape | Electric current | 110-120mAh |
Format | AVI |
Pixels | 352*288 |
Problem solution
Cannot open the drive | Please check if you charge the battery or not/charge the battery |
Can not download file or upload the file. | 1. Check if the PC and drive connect well(correctly). 2. Check if the software drive are installed well( In Windows 98 system) 3. Check if the drive have enough space to store the video file. |